VMware Cloud on AWS is a hybrid cloud service that runs the VMware software-defined data center (SDDC) stack in the AWS public cloud. This partnership between VMware and AWS — the leading server virtualization and public cloud providers, respectively — enables the combination of a wide variety VMware tools and interfaces with the flexibility and power of the AWS cloud.
There are a number of benefits and use cases for extending on-premise data centers to the cloud with VMware Cloud on AWS:
- VMware maintains software updates, emergency software patches, and auto-remediation of hardware failures
- Increasing capacity in the cloud is generally quicker, easier, and sometimes more cost effective than increasing physical capacity in the data center
- Scale capacity to protect services when met with temporary or unplanned demand
- Improve business continuity by using the cloud for Disaster Recovery (DR) with VMware Site Recovery
- Consistent operating environments allows for simplified cloud migrations with minimal re-training for system administrators
- Transfer your existing operating system and third party licensing to the cloud and make use of existing support contracts with VMware
- Expand footprint into additional geographical locations without needing to provision new data centers
The following links contain enough reading to plan your VMware Cloud on AWS implementation and cloud migration strategy, the points below should be enough to get you started.
- Each SDDC supports 4 to 32 hosts, each with 512 GB of memory and 2.3 GHz CPUs (custom-built Intel Xeon Processor E5-2686 v4 CPU package) with 18 cores per socket for a total of 36 cores
- Each SDDC cluster uses an all-flash vSAN configuration utilising NVMe storage
- An initial 4 host cluster provides roughly 21 TB usable capacity
- Each ESXi host is connected to an Amazon Virtual Private Cloud (VPC) through Elastic Networking Adapter (ENA), which supports throughput up to 25 Gbps
- Hybrid Cloud Extension allows stretched subnets between on-premise and cloud data centers for live migration of virtual machines
- Hybrid Linked Mode allows administrators to connect vCenter Server running in VMware Cloud on AWS to an on-premises vCenter server to view both cloud and on-premises resources from a single interface
- VMware Cloud on AWS complies with ISO 27001, ISO 27017, ISO 27018, SOC 1, SOC 2, SOC 3, HIPAA, and GDPR
- VMware Cloud on AWS is managed from a web-based console or RESTful API
- At the time of writing VMware Cloud on AWS is available in the AWS Europe (Frankfurt and London), AWS US East (N. Virginia) and AWS US West (Oregon) Regions
- Basic pricing before discount can be calculated here
The demo below creates a SDDC in the cloud for lab purposes. Before deploying your own environment you should review all the above linked documentation and do your own research to plan your cloud strategy as well as the following:
- Identify or create an AWS account and ensure that all technical personnel have access to the account
- Identify a VPC and subnet by cross-linking the AWS account to the SDDC
- Allocate IP ranges for the SDDC, and determine a DNS strategy
- Identify the authentication model for the SDDC
- Plan connectivity to the SDDC
- Develop a network security policy for the SDDC
Browse to the VMware Cloud Services portal (https://console.cloud.vmware.com) and login using your VMware ID. At the time of writing to access VMware Cloud on AWS you need to be invited or you can register for a 30 day single host trial here.
Select VMware Cloud on AWS. If you have not used the service before you will be prompted to create a new organisation. Enter a name for your new organisation and accept the terms of service, click Continue.
Add a credit card to be billed if you use the service. If you are using one of the free or trial methods outlined above you will not be billed.
After you have created the organisation and added payment information you will be sent to the VMware Cloud on AWS dashboard. The first step is to create our SDDC in the cloud, click Create SDDC.
Billing: annual subscriptions are listed under the Subscriptions tab, you can see other billing information from the drop-down menu next to your organisation name: select Organisation Settings, View Organisation. From here you have services, identity and access management, billing and subscriptions, and support options.
Select a region and deployment model for the SDDC, enter a name and the number of hosts if you are not using the single host deployment. Click Next.
Follow the instructions to connect an AWS account and assign the relevant capabilities.
Once the connection is successfully established click Next.
Select the VPC and subnet to use then click Next.
Specify a private subnet range for the management subnet or leave blank to use default addressing. As mentioned above ensure you have planned accordingly and are not using any ranges that will conflict with other networks you may connect in the future. Click Deploy SDDC.
The SDDC will now be deployed, it takes around 2 hours to provision the ESXi hosts and all management components.
Once the deployment is complete the dashboard will show the new SDDC and assigned resources. Click View Details (you can toggle the web portal theme using the Dark/Light options in the top right hand corner).
From either the SDDC Summary tab or back on the SDDC dashboard you can seamlessly add additional hosts or clusters at any time.
If needed the chat bubble in the bottom right hand corner of the screen will take you through to support.
The Network tab shows the network topology and is where you can configure firewall rules, NAT rules, VPN, Direct Connect, etc.
To access the vCenter Server through the vSphere client the port needs opening, a VPN can also be used. Under Management Gateway select Firewall Rules, click Add Rule. Configure the rule to allow access to the vCenter on port 443 and click Save.
Click Open vCenter from either the Summary or Network tab, if access is in place you are given the firstname.lastname@example.org credentials to open vCenter. Active Directory can also be configured as an identity source later on.
Once you are logged into the vSphere client you will see the familiar vSphere layout.
It is also possible to see your on-premise vCenter Server(s) in the same pane of glass using Hybrid Linked Mode, click here for more information.
Back in the VMware Cloud on AWS portal the Add Ons tab features Site Recovery and Hybrid Cloud Extension for protecting and migrating workloads to your SDDC in the cloud.
You can delete a SDDC from the Actions drop-down menu in either the SDDC Summary tab or the SDDC dashboard. Once a SDDC is deleted all workloads, data, and interfaces are destroyed and any public IP addresses released.
I hope this has been informative and thank you for reading! Be social and share it on social media, if you feel worth sharing it…!!!
I am Rahul Sharma, I am currently working as Subject Matter Expert for SDDC and Cloud Infrastructure Services, Mainly on VMware Virtualization Platform.
I have 9 Year’s of IT experience and have expertise in Designing and Deploying of VMware vSphere, vSAN, vCloud Director, vRealize Automation, SRM, NSX and modern data center technologies like vBlock, Cisco UCS, DELL, HPE C7000, HPE Synergy HCI etc.
I am VCIX6-DCV, Dual VCP – DCV & NV, MSCE – Cloud, CCNA, ITIL v3 Certified.